1.Water pump failure: laser cutting machine water pump on the equipment water temperature regulation played a vital role, if the pump failure or damage, it will lead to poor water circulation, and eventually lead to high water temperature;

2.lubrication system failure: some laser cutting machine needs lubricating oil to operate normally, if the oil system fails, it will lead to poor lubrication, resulting in high water temperature;

3.Radiator failure: the radiator of the laser cutting machine plays a role in heat dissipation, if there is a blockage or failure, it means that the heat dissipation is poor, and eventually lead to high water temperature;

4.Water temperature sensor problem: when the water temperature sensor is faulty or improperly adjusted, it will lead to too high water temperature.

What should I do if the water tank temperature of the laser cutting machine is too high?

1.Check the pump: check whether the working state of the pump is normal, confirm whether the pump is faulty or damaged, if yes, timely replacement or maintenance;

2.Replace the lubricating oil: if the laser cutting machine needs to use lubricating oil, it is necessary to replace the oil regularly to avoid impurities such as mud to block the oil circuit leading to poor lubrication;

3.Clean the radiator: regularly clean the dust or debris in the radiator to ensure the normal operation of the radiator;

4.Adjust the water temperature sensor: adjust the length of the water temperature sensor to ensure the accuracy and stability of the sensor;

5.Installation of temperature alarm: In order to prevent the water temperature is too high to cause equipment failure or damage, you can install a temperature alarm in the laser cutting machine, timely detection and treatment of high water temperature.