1. Capacitor alarm

The capacitor changes to 0, becomes larger, becomes smaller, etc., and this alarm is generally recommended to manually calibrate.

2. Z axis and the fourth axis limit alarm

If this alarm appears in the Z axis, the general treatment is to power off for 5-10 minutes, then reconnect, and then the machine is all back to 0. If it is the 4th axis limit alarm, the positive limit alarm will click the minus sign until the alarm is eliminated. The inverse limit just hits plus, and then the focus goes back to zero.

3. Servo alarm of various axes

If a servo alarm occurs, it is generally recommended to restart. If it can not be eliminated after restart, you need to find the corresponding servo drive in the cabinet, according to the code displayed by the servo, to find the code description and solution.