In the use of CNC press brake, in addition to mastering the scientific operating steps, the key is to pay attention to safety in the operation process. Now let's talk about what issues to pay attention to safety matters.

Before starting the CNC press brake, the necessary detection is essential.

The operator must first check whether there are other foreign bodies on the machine tool, if there are any unknown substances must be removed, and all aspects of the motor must also ensure normal operation. The main power supply must be turned on first, and other power supplies cannot be turned on when the main power supply is not running, which is easy to cause circuit damage, and the power supply must be twisted to an immovable place. Before starting, in order to prepare the relevant mold, the upper and lower angles of the grinding tool must ensure that there is a difference, and the upper grinding Angle is generally smaller. Before the calibration of the grinding tool, the workbench must be wiped clean, the bottom mill can not have any impurities, must be wiped clean. Otherwise, it is easy to damage the machine.

In general, we require a person to operate the CNC press brake, not necessary conditions, do not let the second person participate in the operation of the machine, if there must be an auxiliary person, it must ensure its safety. Especially when the operating foot is stepping on the board, it is necessary to pay attention to the safety actions of the operator at any time, and do not step on the pedal at will. During the bending process, both hands must wear gloves, hand support the relevant parts, once any abnormal emergency is found, be sure to press the stop button at any time.